I have a platinum edition Unisaw and added sharkguard and the adjustable riving knife.
Great saw. I got it used and did have to add the front rail (drill and tap etc)
I can get a used Pcs 175 Sawstop 36" rail and 1.75hp motor for probably $1k. Then I think it would be another $550 to change over the motor to a 3hp.
I'm wondering if it's worth the trouble? I have the time and don't like the manually adjustable riving knife on my Unisaw. I need it and it works but many cuts with the fence over the threat plate I need to raise the blade but can't because it will hit the riving knife. I therefor have to move the fence, pull the throat plate, raise the riving knife etc. Its a hassle and just the other day I almost raised the blade into the riving knife.
I think the top dimensions of the Unisaw are a little bigger than the Sawstop but that may be a trade off to have a left tip, flesh sensing and built in riving knife.
Thoughts?