I’m looking at getting my first set of CBN wheels, I’ve read many many posts on these wheels but am at this point rather confused as to what grit/ grits I should get. I’m pretty certain that I don’t need a course 80g and am leaning more towards getting both wheels of the same grit, mostly because on one side I will have the platform jig setup and on the other the varigrind for my gouges.
If I get two wheels of the same grit what grit would be recommended?
Then on the other hand if I was to get wheels of two different grits what would then be recommended?
Also is it a great advantage to get the 1 1/2” wheels over the 1” ones? And I’m also thinking that I would not be wanting the wheels with the radiused corners.
Looking forward to your replies.
John