I am building a backgammon board and using wood inlays forthe long diamonds in the base board. I am using a maple board with exotic woodas inlays. The problem I am having is after I glue the inlays the board warpsonce it dry's. I started trying to work with thicker wood 1/2 and then gluingthe inlay which is 1/16 thick. Once dry, I then planned it down to a 1/4. Thishelped but the board still warps. I am using wood glue. The wood temperature isstable. The thinner the wood I use the more it warps. I am laser engraving the maple base board 1/16 to insert the inlays.
Any help would be appreciated.