I keep my tools in a tool cart between lathe sessions, but I have a portable tool 4 drawer cart with a hinged lid that opens. I keep the dividers, screws, glues, chucks etc in the drawers. The chisels are in the top covered tray. On the lid, I mounted two magnetic tool holder strips horizontally one about 5 inches above the other. I put the lathe chisels I will be using against the magnets vertically and they stay right there, Generally I have them to my immediate right, but I can move the cart a little closer when doing small work. When done the chisels go back to laying in the top tray. Works for me