I just got a vent free gas heater for the shop/ garage, for winter heating. I was wondering if running a line is difficult or not. Or is this something I should have a professional do?. I am aware of the hazards if fittings are not connected corectly and all the warnings and how to check for leaks. But I have never done this before and I need some opionins/help on this. (Don't want to blow up the whole house and all)
Should I tie into the line that runs to the upstairs room and run it across the attic then down into the garage or tie into the line under the house drill a hole in the block then into the garage? Can I run the new line outside along the foundation (aprox. 7 ft.)then into the garage?
Is copper pipe ok or should I go with the heavier galvanised pipe?
Any help is greatly appreciated, Doug