I know this is a little off topic but here goes. I'm getting ready to mount an RO water filter under my kitchen sink. Having been down this road before I know that these can be a little hard to service and you end up with water in the sink cabinet. My idea is to have a pull out mount that I can mount the water filter assembly too and have it slide out when filter changes are required. This would allow me to put a pan on the floor to catch any spilled water and make it easier to access the filter housings. I'm picturing a plywood panel mounted on a couple of drawer slides that are mounted to the side of the cabinet. The water lines would of course need to be long enough to allow for the filter movement.
Has anyone done something like this? Problems and issues to look out for?
Thanks,
Allen