Wondering if anyone has used or installed the PALS system on their contractor saws. I received a set on Wednesday, but believe that one of my l-brackets is not correct. As opposed to the other and from pictures I have seen, I think the bracket has been drilled/tapped incorrectly. As you can see in the picture, it’s is drilled/tapped on an angle. I emailed the company and asked if I could get another bracket, and hopefully confirm that the bracket shouldn’t be drilled like that, but haven’t heard back from them yet. I unfortunately installed one of the studs, so sort of need to know on way or the other. Any help would be appreciated.
4B285DBE-7AF6-4DD8-B50C-CBA74C81229F.jpeg