Originally Posted by
Bobby Tsioles
Folks,
Looking for some advice. I have a project that's going to require me to resaw a bunch of standard pine 2x6 dimensional lumber. I currently have a 3/4" timberwolf blade. The feed rate on a test 2x6 was way too slow, like 10 minutes or so for 1 pass, which required a fair amount of pushing to get it through the saw. Now I am running a Jet 14" with the 6" riser block. I know, not a great saw, but I'd think it should be good enough with the fastest / easiest cutting blade.
I've been searching for other blades, and am wondering what your opinions are on which blade is the fastest cutting bandsaw blade available? I'm guessing it's going to be a "carbide" tipped blade like the resaw king or trimaster.
Again, the main thing I'm looking for is speed. I don't care much about the quality of the cut because I'm going to run everything through the planer afterwards.
Thanks!
Bobby