Hello,
I built my workbench with lots of advice and knowledge from here.
Came out really good and works great.
But
I cant get my holdfasts to work at all.
My bench is 3 inch thick maple
I drilled my dog holes using the Lee Valley 3/4 dog hole bushing kit.
I used 60 grit paper and sanded the shafts of my Gramercy holdfasts. (round and round not up and down)
I am hitting them with a 30oz Wood is Good mallet.
Most times they don't hold at all but every so often it is tight till I move the object side to side.
What am I doing wrong?
Thanks
Larry C