I bought my first saw. It's a disston d-100, the etching is faded but you can make out the numbers and I had my kids look through the handles at the disston website and it matches with the d100. 26"long and 10ppi
The two horns where cracked and they moved with slight pressure, at first my plan was to just glue them together and leave it like that. I ended up taking the handle off, held the cracks open with a toothpick and then worked some epoxy down with a heat gun. cleaned it lightly and coated it with boiled linseed oil. Also cleaned the medallion and nuts. The medallion dates it pre 1917. Very fun. I also got a stanley square which i'll clean later. All for$12 I think it was a good buy
20190302_210835.jpg20190302_210220.jpg20190302_210236.jpg20190304_233647.jpg20190304_233657.jpg20190304_142747.jpg