Figured since I shared the kennel on here, I should share some of my recent turnings too. Just a little introduction I guess.
I started turning in February of 2017 and dove into the hobby hard after getting the bug. My first lathe was a Rikon 220vsr and not too long after that I found a VB36 locally. Built a shop to house it all and it's been downhill since.
Edit: Here is a link to a boat load of photos I've taken over time, mainly of bowls. https://photos.app.goo.gl/bgFjaX9LZzf8Si539
Last year I got my hands on a black walnut tree that fell during hurricane Michael. Most of the trunk of the tree was hollow, but I grabbed everything I could use. Here are a couple of live edge bowls I turned from that tree.
The finish is eight coats of high gloss tung oil. The larger ones are 13" long. There was one more oblong bowl in the set, but it was already claimed by my wife before I could even think to put it into my sales booth. lol
Walnut live edge bowls.jpg