Originally Posted by
bridger berdel
Hmmmm.... i could see something like a floor flange with a pipe tap run in from the other side to reverse the taper of the threads, with a stub of pvc pipe threaded in that way, mounted to the bottom of the benchtop and trimmed flush. Hey, it might work. The pvc might be too slippery or dense or brittle for the holdfast to grab well, or there might be another plastic that would be better.
Anyone have data about the length/diameter parameters for holdfast holes?
Thoughts?
My idea was for hardwood. As far as using plastic, you may be right about it being too slippery.
jtk
"A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
- Sir Winston Churchill (1874-1965)
Contributor
Posting Permissions
Reply With Quote