Hello all,
I am turning with a Robust American Beauty with the 3 HP motor. It is fitted with a Toshiba VF-S15 VFD.
After turning hundreds of bowls in the past 4 years, recently the drive has begun cutting out under load. I don't mean belt slippage, I mean complete electrical cutout.
Has anyone else had this issue, and if so, what parameter on the VFD did you adjust? I'm guessing it has to do with amp draw, but have not yet dived into the parameter list.
Please don't suggest I contact Robust, because I did and the response was maybe I should learn how to turn. I would have given that some thought had I not already successfully turned a cajillion bowls and this is a new phenomenon.
thanks in advance,
Clay