What do you do when then are no sharpening services in you area, the closest service to me is 100 mile away, that's 400 miles and at least 3 days.
What do you do when then are no sharpening services in you area, the closest service to me is 100 mile away, that's 400 miles and at least 3 days.
Assumption is the mother of all screw ups
Anonyms
You're in Oregon. Use Snook's Saw. They are great people and Jerrimy has always taken great care in making my custom blades and sharpening. You'll want to ship as they are in Salem. That's the cost of living in beautiful Lakeside ;-)
Last edited by glenn bradley; 07-23-2020 at 7:12 PM.
"A hen is only an egg's way of making another egg".
– Samuel Butler
Thanks Glenn, it was a real shock to our system when we first moved here from So. Cal., it's been over 13 years so we're used to it now, even used to the weather.
Assumption is the mother of all screw ups
Anonyms
You ship them out to be sharpened. A lot of satisfied customers here using Dynamic Saw in Buffalo NY.
Ballew Saw is another reliable, quick-turnaround sharpener located in (I believe ) Missouri. I have used them for at least 30 years.
David
I know what you mean. I did a job in Seattle for 6 months. It doesn't rain all the time but, it does seem to rain EVERY DAY. It even snowed on me a couple of times. Allowing snow to fall outside the recreational areas!?! We have regulations about such things down here ;-)
I ran into Snook's through Carbide Processors. Tom and his group are another batch of good folks to know when it comes to cutters.
Last edited by glenn bradley; 07-24-2020 at 9:25 AM.
"A hen is only an egg's way of making another egg".
– Samuel Butler
I found a cabinet maker who also sharpens saw blades (I don't understand why he doesn't advertise), he's in Coos Bay, about 20 miles from home. Will report on how it works out.
His name was given to me by the guy who retired.
Assumption is the mother of all screw ups
Anonyms
You know you’re a Creeker iF...
you are more emotionally attached to your blade sharpener than you are to your barber.
Love it!👍
Although it doesn't apply to me, I've cut my own hair for 20 years.
D-7 1.JPG
Assumption is the mother of all screw ups
Anonyms
I'm going to get fried for this, but pick up a HF blade sharpener. Got one a few years ago and it brings an old blade back to 90% of what a good sharpening service will do. All you touch up is the front face of the tooth.
Last edited by Ole Anderson; 07-26-2020 at 8:36 AM.
NOW you tell me...
Thanks Ole interesting tool, and not too expensive either. When my new sharpener retires I may consider it, especially with HF giving away 20% discount coupons.
Assumption is the mother of all screw ups
Anonyms
I got my blades back and they mostly look good, here's a couple of pictures of one tooth on the 80 tooth saw, there are probably 4 or 5 other teeth with similar marks.
S20200728_0000.jpg and slightly different angle, S20200728_0001.jpg
I can promise I never cut a nail with this blade, could this be caused by heat, should I be concerned about the quality of my cuts, should I find a new sharpener, he didn't notice the marks.
Assumption is the mother of all screw ups
Anonyms