I'm ditching the casters on my Noden Adjust-A-Bench in favor of something more solid and more adjustable. I need to match the height of my table saw and i can't quite do it with the casters adjustments.
I'm using a threaded nut pushing against a wood block on the floor. I have a steel plate for the nut to push against. I haven't screwed down the plate yet as I'm working through it to make sure it will work as I envision. The issue is that when I turn the bolt it shifts the plate (and wood base) underneath it.
1) will this fix itself when I screw the plate down?
2) is this because of the raised markings on the head of the bolt? should I grind them off so the bolt head is smooth?
right side, which I adjusted first, didn't move, left side did.
IMG_0630.jpgIMG_0629.jpg