Unloading Hammer K3 Winner from pallet

[Gabriel Marusic]

Hope you never, ever need parts from Felder. I ordered two parts from them and they took 5 months to deliver them. If they were parts critical to the operation of the machine I would have been furious.

5 month wait on a part is awful. I get the full machine taking a while but an individual part is nuts.

[Will Blick]

nuttin like building your own custom rigging contraption...
manufacturers should provide us better offloading information...
like a pix of how it will sit on the pallet.
My Grizz 17" Ultimate Bandsaw was on TWO pallets!
that was a curve ball I had never seen before, as it was standing TALL on the two pallets, not as easy to walk off...
then, the hardware was not installed for top lifting eyebolts, which I planned to use...rain was coming
anyway, seems its always an adventure,
prepare as best u can as you are...then...
expect the unexpected - that's my words of wisdom.

[Rod Sheridan]

Youtube video shows "Harry" from Hammer building a ramp and moving the K3 off the pallet with a pallet jack

That actually is his name, he's a really nice guy...........Rod.