[OP]
Member
I have an older Rockwell/Delta lathe and I am looking for a different tool rest base. I have to adjust my current base with a 3/4" wrench. I'm looking for one that can be adjusted with a handle on the end like the one in the attached pic. Can anyone direct me to one cheaper that the $50.00 one on Amazon?
Thanks,
Greg
Contributor
Somebody else might know but the ones I have seen are $70 and up in the woodworking catalogs.
Bernie
Never put off until tomorrow what you can do the day after tomorrow.
To succeed in life, you need three things: a wishbone, a backbone and a funnybone.
Member
If you can get it for $50, grab it. That's the best deal I've heard so far. Just paid $72 for mine and thought I got a good deal
Member
Originally Posted by Greg Scott
look in the classifieds below this reply.
bob
[OP]
Member
Bob,
look in the classifieds below this reply.
bob
Never noticed that down there before, I'll send him a pm to see if he still has it.
Thanks for the heads up.
Greg
Member
Someone want to draw me a picture..I am confused. Feel like you guys are speaking in code.
I am also looking for the same tool rest for the same reason.
What if the light at the end of the tunnel is a train?
Posting Permissions
Reply With Quote