I’ve been looking at all the options and lots of reviews have been commenting about issues with the casters. I’ve looked at the Jet, HTC, Bora, Grizzly, and so many others. All the machinery I got so far already were mobile, or converted in some way or form so I don’t have a lot of experience with what would be good or not. I do like the Bora base, I like it’s locking mechanism idea, but in the back of my mind these are fairly simple designs, I’m tempted to take a crack at building one myself. I have Zambus casters on my bandsaw and they are fantastic, so was almost thinking using those. They’re expensive but oh so sweet. Plus got a new welder as I have been learning to do that as well, buddy of mine does it for a living so he’s teaching me. So build one or buy one? Benefits, just put it together and I’m good to go or build one and have it do exactly what I want, but just more time consuming. It’s a Jet 20” planar, 650ish lbs, the only concern would be making it strong enough. Figured maybe I would need to do some math, or just over engineer it. My friend would be available for the welding, so the welds would be done right. Just seems like a good opportunity to learn. But like I’ve posted before, I work too much, my free time is limited, I’m still organizing the garage and getting it setup. Would the Bora be suitable? Almost hate to add another project to the king list. Got the tools but still working 14-17 hour days to make sure I have enough for materials lol. So with that regard would something like a Bora be suitable, could the casters be swapped if they didn’t work for me? Anyone have suggestions for something else for similar size planer or equipment 650lbs or heavier? Thanks!