I have a set of cheap sawhorses from HD that need to go. I was eyeballing the Toughbuilt c700 saw horses. I like the idea of dropping a piece of ply or foam to use a support for my track saw.
I then started looking at the Bora Centipede with MFT tops and that got me thinking if that is the route to go.
Current garage setup does not have space for a 4x8. If I use saw horses its usually outside. I might have room for a 2x6 centipede. Probably more if I can organize better but that's another issue.
Grand scheme I'd get both and use a small centipede with MFT in the garage and sawhorses outside to break down panels or when it's nice weather and I'm working outside.