Hello all and Happy Holidays! I am building a dining table extension to match my existing table. The top will be 34" wide x 60" long. The base will be 4" wide aprons connected to four square post legs. The aprons will be inset from the top by 2". The legs are 2.75" square. I plan to connect the aprons to the legs with dominos for positioning but no glue so the base can be disassembled for storage. I'm looking for advice on what type of knock down hardware I can use to secure the aprons to the legs, and the top to the aprons. For the legs I was thinking of bed rail fasteners, but most are too large. Lots of other choices but I have no prior experience in knock down design, so all suggestions welcome!
Thanks,
Len