These utensils had gotten out of control so I'm designing a solution. I could use a little help.
Kats.jpg
Here's a first version made in a few minutes from cardboard and tape. It has 2 dividers. The compartments are;
3 1/4" x 3 1/4", 3 1/4" x 4" , 3 1/4" x 3 1/4". all are 6" tall.
It needs to be wider and maybe a tad shallower front to back, and with slightly narrower compartments. So the next one will have 5 compartments 3" x 3". Also it will be tilted away from the wall about 20 degrees. In the resulting space in back it could have a shallow bin. It'll get a small holster for kitchen scissors on the right end.
Planning to build from Sapele or Walnut, 3/8" thick with hand cut dovetails.
The croc on the right is there to keep it away from the fire and spatter on the range.
Suggestions?