-
Feel free to add another "off" switch on the back or side near the back. Helps if you are one guy pulling big pieces off the back of the saw.
I bought a rope switch to use as a foot "off" switch. Took too much pull to be easy to adapt so I am still thinking. My lathe has a mechanical foot brake and off switch setup on it.
Bill D
Last edited by Bill Dufour; 04-13-2024 at 4:47 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules