-
If the grain directions align you don't have to worry too much about dimension changes. Cross grain joints will be a problem, so you have to make provisions for expansion/contraction. Your long aprons will be a problem. You might be able to attach them with figure 8 clips. You can find figure 8 clips in stainless.
Last edited by Lee Schierer; 04-24-2024 at 6:59 PM.
Lee Schierer
USNA '71
Go Navy!
My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Reply With Quote