Making Crispy Ash Noodles..yum..
May Project, Stiles, noodle maker.jpg
about every 3 pass, rub a bit of wax along the groove...tight squeeze..
May Project, Stile layout, defect.jpg
Had to make sure I was going the right direction, and NOT tear this spot up..
May Project, Stiles, depth checker.jpg
Used one of the panels to check the depth...had to raise the depth stop twice...then the rebate fit all the way down into the groove...
Got 2 Stiles done..was running low on "Get-up-and-go" stopped and laid out the Mortises I need to chop..
May Project, Stiles, needs chopped.jpg
Will start on those once the other 2 stiles have their grooves done..
Will need that Narex 8mm Mortise Chisel for the Mortises...and the Jig to hold the Stiles while I chop the Mortises out..
Been a very busy 3 days...
Scrap Report, getting full.jpg
Getting filled up...
Scrap Report, 2 day's worth.jpg
Needs picked up. Currently, we are having a Thunderstorm going through...Fire Pit will have to wait a day..
Stay tuned..