Hi All
I am posting some of the pictures of my new basement shop in process. 6 months ago the kitchen remodel was far enough along that I moved my shop from the kitchen where my wife and I where building cabinets to two rooms in the basement (middle furance room 13' by 20', now my machine room and the larger old washroom 15' by 13', now my bench room). The wife wanted to start using the kitchen even though we were not done. I have been working to get my shop in order so I could finish up the kitchen and move on to the next project (wife has a endless list of these). I stopped working on the kitchen to get my shop somewhat settled. Could not work very well without everything having a home. Spent more time picking up or looking for something than working. Below are a few pictures of my shop:
Machine room looking NW.jpg
The picture above shows a view looking northwest in my machine room. In the picture you are looking over my sander at the 6" jointer and my wall of clamps. You can just see the corner of the talbesaw/router table.
Machine room looking south.jpg
The south view looks across the tablesaw/router table you can also see the drill press.
Bench room looking north.jpg
This picture shows half the cabinets on the north wall I built for my main storage area (at this time they are not complete).
Bench room north comp.jpg
Pictures shows other half of my storage cabinets the larger upper without the doors yet will be for all my wood working hand tools. the wall is 15' long
Bench room looking west.jpg
West view of the bench room shows my small sheet storage with some of my Festools tools on the wall and the rest under my MFT table.
On another post I will finish my shop in progess tour. Need to go make some chips now.
________________________________________________
If anything can go wrong, Fix It! (To hell with Murphy!)
from Peters Laws