Results 1 to 14 of 14

Thread: Travis Stinson Demo in Memphis

  1. #1
    Join Date
    Jul 2005
    Location
    East of the Mississippi
    Posts
    3,807

    Travis Stinson Demo in Memphis

    TaDa !! Here it is, the long awaited pic's of Travis' demo at the MSWG club in Memphis today. We had a good turnout. The only problem was the Conway crew did not get to make it so we were 3 short. Travis and I both were really looking forward to seeing them but things happen sometimes. He did not have a single catch or malfunction. (that anyone noticed anyway). Turned a complete hackberry HF with an Ebony collar. Did not sand or finish though. I haven't told him yet that our policy is that once it's finished he sends it back and we auction it to raise funds for the club. Anyway the pic's are self explanatory and the last one is typical of the member's reaction.
    Attached Images Attached Images
    941.44 miles South of Steve Schlumph

    TURN SAFE

  2. #2
    Join Date
    Jan 2005
    Location
    Goodland, Kansas
    Posts
    22,605
    I tell ya Keith I would give anything to attend a demo with Travis. Looks like a good time was had by all.
    Bernie

    Never put off until tomorrow what you can do the day after tomorrow.

    To succeed in life, you need three things: a wishbone, a backbone and a funnybone.



  3. #3
    Join Date
    Oct 2005
    Location
    Phoenix, AZ
    Posts
    991
    Holy cow, you mean to tell that my mini can be used to create the things Travis does? Well there went the bar past the roof.

    That looks to have been a treat.

  4. #4
    Two things I want to do someday, watch Travis perform his magic and have a plate of ribs at the Rendezvous. Would have been a good chance for both.

  5. #5
    Join Date
    Dec 2004
    Location
    Colorado Springs
    Posts
    306
    Would it be inappropriate to notice that Travis has cute knees?
    Joe

  6. #6
    Join Date
    May 2006
    Location
    Roanoke Virginia
    Posts
    2,694
    Blog Entries
    2
    I too would've liked to have been there.
    [SIGPIC][/SIGPIC]Tom

    Turning comes easy to some folks .... wish I was one of them

    and only 958 miles SE of Steve Schlumpf

  7. #7
    Join Date
    Oct 2006
    Location
    Harvey, Michigan
    Posts
    20,810
    Wow - thanks for sharing Keith! There are a lot of members that perform absolute magic when it comes to turning and Travis is right at the top of the list! Hopefully I will get the chance to attend one of his demo's - til then, thanks for keeping the rest of us in the loop!
    Steve

    “You never know what you got til it's gone!”
    Please don’t let that happen!
    Become a financial Contributor today!

  8. #8
    Join Date
    Feb 2005
    Location
    California
    Posts
    277
    Quote Originally Posted by Joe Melton View Post
    Would it be inappropriate to notice that Travis has cute knees?
    Joe
    Nope!

    It would only be inappropriate if you noticed he had a cute weeknee.



  9. #9
    Quote Originally Posted by Joe Melton View Post
    Would it be inappropriate to notice that Travis has cute knees?
    Joe
    Only if you stay in Colorado Joe......

  10. #10
    Join Date
    Aug 2006
    Location
    Rio Rancho, NM
    Posts
    2,568
    Quote Originally Posted by Curt Fuller View Post
    Two things I want to do someday, watch Travis perform his magic and have a plate of ribs at the Rendezvous. Would have been a good chance for both.
    Curt, don't rush to Memphis to go to the Rendezvous. The quality has gone downhill in recent years!!

    Nancy
    Nancy Laird
    Owner - D&N Specialties, Rio Rancho, New Mexico
    Woodworker, turner, laser engraver; RETIRED!
    Lasers - ULS M-20 (20W) & M-360 (40W), Corel X4 and X3
    SMC is user supported. http://www.sawmillcreek.org/donate.php
    ___________________________
    It's nice to be important, but it's more important to be nice.

  11. #11
    Join Date
    Aug 2006
    Location
    Rio Rancho, NM
    Posts
    2,568
    Quote Originally Posted by Joe Melton View Post
    Would it be inappropriate to notice that Travis has cute knees?
    Joe
    Can I notice? NICE legs, Travis!!

    Nancy
    Nancy Laird
    Owner - D&N Specialties, Rio Rancho, New Mexico
    Woodworker, turner, laser engraver; RETIRED!
    Lasers - ULS M-20 (20W) & M-360 (40W), Corel X4 and X3
    SMC is user supported. http://www.sawmillcreek.org/donate.php
    ___________________________
    It's nice to be important, but it's more important to be nice.

  12. #12
    Join Date
    Dec 2006
    Location
    Lubbock, Texas
    Posts
    914
    Trying not to be envious!! Trying not to be envious!! Trying not to be envious!! Trying not to be envious!!

    DOHHH it's not working envy setting in!!!! When you coming to my neck of the woods Travis. We have one of the fastest growing turners clubs in the country. We sure could use you ta learn us backwoods uhhh I meant backshrub folks how to use wun them spinny thangs!!!
    Be a mentor, it's so much more fun throwing someone else into the vortex, than swirling it alone!

  13. #13
    Hmmmmm, Texas = Mesquite. A truckload of Mesquite can be a very strong persuader.

  14. #14
    Join Date
    Dec 2006
    Location
    Lubbock, Texas
    Posts
    914
    Shoot if weeds is all it takes to get you down here!! Your a CHEAP DATE!!
    Be a mentor, it's so much more fun throwing someone else into the vortex, than swirling it alone!

Similar Threads

  1. Happy Birthday...Travis Stinson, Charlie Woods and Jason Tuinstra!
    By Ken Fitzgerald in forum Off Topic Forum
    Replies: 5
    Last Post: 05-02-2007, 1:52 AM
  2. Creekers visit and Plane making demo by Zahid
    By Rick de Roque in forum General Woodworking and Power Tools
    Replies: 9
    Last Post: 03-13-2007, 10:54 AM
  3. Congratulations Travis Stinson
    By Keith Burns in forum Turner's Forum
    Replies: 17
    Last Post: 10-20-2006, 10:38 AM
  4. Happy Birthday, Travis Stinson!
    By Michael Stafford in forum Off Topic Forum
    Replies: 10
    Last Post: 05-01-2006, 7:29 PM
  5. Turner Interview: Travis Stinson (UPDATED w/ Picture)
    By Mark Cothren in forum Member Interviews
    Replies: 27
    Last Post: 03-21-2006, 2:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •