test...couldn't find 'test area'
test...couldn't find 'test area'
IBILD High Resolution 3D Scanning Services
Pass....
Steve Beckham
Epilog Mini 24 with 45 Watt, Ricoh GX 7000 Sublimation, Corel X3, Corel X4 and PhotoGrav, Recently replaced the two 'used' SWF machines with brand new Barudans.
What was the question
Gary
IT WORKED! Welcome to the Creek! You've got the posting down, so be sure to tell us a little about yourself. Jim.
Coolmeadow Setters...Exclusively Irish! When Irish Eyes are smiling....They're usually up to something!!
Home of Irish Setter Rescue of North Texas.
No, I'm not an electrician. Any information I share is purely what I would do myself. If in doubt, hire an electrician!
Member of the G0691 fan club!
At a minimum, I'm Pentatoxic...Most likely I'm a Pentaholic. There seems to be no known cure. Pentatonix, winners of The Sing Off, s3.
Gary
Welcome to SMC...where the real test is just to get involved in the conversations...
--
The most expensive tool is the one you buy "cheaply" and often...
Ha! I see there are some 'kindred clowns' on here! Great!
When I'm not working, I spend most of my time involved in ShopBot CNC related things. I run a 3D laser digitizing & machining business in South Jersey (near Philly - Yo!) I was a software engineer going to the salt mines every day...now I get to play with robots, strange materials and lasers
I just saw Keith at a ShopBot function and figured I might as well join this sector of cyberspace. I never proclaim to be a woodworker...but maybe some of your good ideas will rub off on me.
-Brady
IBILD High Resolution 3D Scanning Services