Hello,
Here is a small table that I recently completed. It was a good little project that used up some of the smaller pieces of wood.
The legs I turned and are curly soft maple, drawer front is birdseye hard maple, drawer glides are white pine, and everything else is cherry. Knobs I turned in cherry.
Finishish is tung oil and poly.
Construction is mortise and tenon, drawer is hand cut dovetails. Drawer glides are mortised into the the legs and apron, top is held on by oversized pocket holes scews and washers. Dimensions are 28 3/4" H, 15 3/4" W, 37"L.
Thank for looking