Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 40

Thread: Problem receiving emails sent from SMC

  1. #16
    You might let Aaron know that your DNS (mx) points to 70.169.136.35 and not 70.169.136.36. Any mail server doing a reverse lookup may deny it without the 36 entry. Something else to consider.

    MX>>(PRI=10) mail.Sawmillcreek.org [70.169.135.35]

  2. #17

    Unhappy No Email! Help!

    I'm having the same problem receiving SMC email. I'm subscribed to the Laser forum but haven't received any emails since mid September. When I called AT&T/Yahoo, my ISP, they said they weren't blocking anything and the problem must be at the SMC end. I checked my settings on the SMC User CP and everything looks OK.

    What's happening?
    Tom Hempleman
    Carroll, Ohio

  3. #18
    Join Date
    Nov 2003
    Location
    Cave Creek, AZ - near Phoenix
    Posts
    1,261
    Quote Originally Posted by Thomas Hempleman View Post
    I'm having the same problem receiving SMC email. I'm subscribed to the Laser forum but haven't received any emails since mid September. When I called AT&T/Yahoo, my ISP, they said they weren't blocking anything and the problem must be at the SMC end. I checked my settings on the SMC User CP and everything looks OK.

    What's happening?
    Thomas - Interesting that the problem is not only with qwest.net users. I hope the folks at SMC will find some time to resolve this pesky problem soon.
    Dave Falkenstein aka Daviddubya
    Cave Creek, AZ

  4. #19
    Join Date
    Jan 2004
    Location
    Lewiston, Idaho
    Posts
    28,583
    It's interesting. I am getting emails via SMC.
    Ken

    So much to learn, so little time.....

  5. #20
    Join Date
    Jan 2004
    Location
    Louisiana
    Posts
    508
    I wonder if I could bother someone to send me a PM and e-mail to see if I am getting them. I sent a PM to the person whose name I was matched up with for the ornament exchange but as of today I still have not heard back, so I'm not sure if he got it.

    Bobby McCarley
    Louisiana

  6. #21
    Join Date
    Nov 2003
    Location
    Cave Creek, AZ - near Phoenix
    Posts
    1,261
    Quote Originally Posted by Bobby McCarley View Post
    I wonder if I could bother someone to send me a PM and e-mail to see if I am getting them. I sent a PM to the person whose name I was matched up with for the ornament exchange but as of today I still have not heard back, so I'm not sure if he got it.

    Bobby McCarley
    Louisiana
    I sent you a PM. I don't think I can successfully send you an email, based on the problem I am experiencing (but I tried anyway).
    Last edited by Dave Falkenstein; 11-21-2007 at 3:37 PM.
    Dave Falkenstein aka Daviddubya
    Cave Creek, AZ

  7. #22
    Join Date
    Jan 2004
    Location
    Louisiana
    Posts
    508
    Got them Dave, Thanks.

    Bobby

  8. #23
    Join Date
    Aug 2005
    Location
    Benton Falls, Maine
    Posts
    5,480
    Email sent Bobby
    Only the Blue Roads

  9. #24
    Join Date
    Jan 2004
    Location
    Louisiana
    Posts
    508
    Andy, got your e-mail, thanks.
    Dave, your e-mail bounced back.

    Bobby

  10. #25
    Join Date
    Nov 2003
    Location
    Cave Creek, AZ - near Phoenix
    Posts
    1,261
    Quote Originally Posted by Bobby McCarley View Post
    ...Dave, your e-mail bounced back.

    Bobby
    Bobby - I assume you tried to send me an email through SMC, and it bounced back to you - right??? If you still have the email with the error information, please email it to me outside of SMC to:

    daviddubya (at) qwest.net

    I'd like to check to see if the error condition is still the same as it has been. Thanks.
    Dave Falkenstein aka Daviddubya
    Cave Creek, AZ

  11. #26
    Join Date
    Jan 2005
    Location
    University Place, Washington
    Posts
    1,268

    Here Ya Go

    The original message was received at Thu, 22 Nov 2007 12:18:24 -0500
    from northwindassociates.com [127.0.0.1]

    ----- The following addresses had permanent fatal errors -----
    <daviddubya@qwest.net>
    (reason: 554 5.7.1 Service unavailable; Client host [70.169.135.36] blocked using bl.qwest.net)

    ----- Transcript of session follows -----
    ... while talking to mx4.qwest.net.:
    >>> DATA
    <<< 554 5.7.1 Service unavailable; Client host [70.169.135.36] blocked using bl.qwest.net
    554 5.0.0 Service unavailable
    <<< 554 5.5.1 Error: no valid recipients
    Sometimes we see what we expect to see, and not what we are looking at! Scott

  12. #27
    Join Date
    Nov 2003
    Location
    Cave Creek, AZ - near Phoenix
    Posts
    1,261
    Thanks Scott. That is the exact same error message I got on a couple of previous tests. Bottom line - I cannot receive emails sent from SMC. I forwarded the error message to qwest and await their reply.
    Dave Falkenstein aka Daviddubya
    Cave Creek, AZ

  13. #28
    Join Date
    Nov 2003
    Location
    Cave Creek, AZ - near Phoenix
    Posts
    1,261
    Bobby - Thanks. I received your email, and the error message you sent me is the same as the one from Scott. Obviously, the problem remains unresolved.
    Dave Falkenstein aka Daviddubya
    Cave Creek, AZ

  14. #29

    email problems

    I sent a PM to Keith a few days ago regarding this problem. I haven't heard anything from him. Now I'm wondering if my PM ever got to Keith. It didn't bounce back. It may be going to another planet for all I know. AT&T/Yahoo (my ISP) still claims there are no blocks or problems at their end and say it must be a problem at SMC. I'm still not getting email notifications to the SMC forum I'm subscribed to. In fact I have had no email or PM's from SMC since September. Anyone know what's going on?
    Tom Hempleman
    Carroll, Ohio

  15. #30
    Dave F.
    I sent you a test message through both SMC's email system and the PM system. Let me know through this forum if you receive either one of them. I think I may be shooting blanks from this end.
    Tom Hempleman
    Carroll, Ohio

Similar Threads

  1. SawStop and Wixey Table Saw Fence DRO– A Problem Solved (pics)
    By Glen Blanchard in forum General Woodworking and Power Tools
    Replies: 12
    Last Post: 08-03-2010, 1:03 PM
  2. Mercury 25w alignment problem HELP!
    By Harry Radaza in forum Laser Engraving General Topics
    Replies: 3
    Last Post: 09-18-2007, 7:07 AM
  3. Problem with Lunchbox Planer
    By Hans Braul in forum General Woodworking and Power Tools
    Replies: 3
    Last Post: 01-23-2007, 1:05 PM
  4. Had the strangest table saw problem last night
    By Mike Schwing in forum General Woodworking and Power Tools
    Replies: 1
    Last Post: 07-01-2003, 4:04 PM
  5. Cope/ Stick Problem w/ raised panel doors
    By John Preston in forum General Woodworking and Power Tools
    Replies: 5
    Last Post: 06-25-2003, 12:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •