Took shipment of a new long waited band saw from Grizzly G0513X2 only to uncreate it to find that the top and bottom doors were pushed in about 1". The bottom one was pushed in so far the cap screw on the lower wheel made a large dent in the door. Called and there hopefully shipping the new doors out tomorrow. How many run their saws on 220. Came wired for 220 & I was wondering does it need to be. Plus there was no plug so I can't see if there was any other damage. Living on an island with no hardware stores makes it hard to find a 220 plug. I guess I'll have to make a trip off in a few days. Good excuse to pick up more wood.