Page 1 of 2 12 LastLast
Results 1 to 15 of 17

Thread: Worst Service Ever! woodworkershaven.com

  1. #1

    Worst Service Ever! woodworkershaven.com

    I rarely ever feel motivated enough to comment on service issues, having spent a lot of time on both sides of the register in my life, but I just had to vent my frustration with woodworkershaven.com. The blocks are only like 11 bucks, but it's the principle!

    _____Sat, 3 Nov_____

    I attended a woodshow in my area last November, at at the time there was a promotion from said company for Bandsaw blades. These are the highly reputable Viking blades, (formerly Tiberwolf Baldes). Anyway, the were slightly reduced and the company was throwing in some phenolic Bandsaw plates or cool blocks. They didn't have my size, so i agreed to have them sent out "in a few weeks". Here is the correspondence that followed:

    (I reversed it for logical progression)

    _____Thu, 28 Feb_____

    Michael,

    Back in November, I purchased 3 Viking Bandsaw blades from you at the Calgary Woodworking show. At the time, you were including one of your Safety Paks as a promotion, but did not have the cool block size I required for my General 90-150 14” Bandsaw, ready at that time.

    We agreed that you would send them out in a few weeks when they were ready. Well it’s been a little longer then a few weeks and I have not seen the blocks yet – could you please send these out?

    Please let me know if there are any issues. I’ve included the receipt indicating our arrangement.

    Thanks for your time,

    Steve

    _____Tuesday, March 11_____


    Hello,

    Just following up as I did not receive any reply to my email (below) sent last week.

    ?

    Steve

    REPLY_____Tue, 11 Mar_____

    Steve
    Sorry for the delay but I wanted an answer for you first. I am still waiting on time frame for the material which has all of a sudden become an issue. I will let you know once my supplier gets back to me
    Thanks
    Michael
    888 994 2836


    _____Wed, 28 May_____

    Mike,

    Just following up on this outstanding request. Have you got the Cool Blocks in yet for the General 90-150 14” Bandsaw?

    Standing by,

    Steve


    _____Friday, June 13_____

    Mike,

    Seriously. It’s been over 8 months I’ve been waiting for you to make good on your promise to send me these blocks. I certainly feel like I’m getting the brush off here. This whole experience has really tarnished my opinion of your company and customer service.

    Do you have these blocks in stock? If not, what can you do to restore my faith in your company. I’m getting tired of having to send an email every 2 months to remind you of something you should have taken care of last year. I’d like to wrap this up if I can.

    Hopefully you can find the time to reply to me,

    Steve


    _______________

    Oh, and I still haven't heard back from my email sent on the 13th. Ah well, I just had to share. Sorry if it's off topic.

  2. #2
    Join Date
    May 2008
    Location
    Edmonton, AB
    Posts
    246
    Thats a crock. He left you a toll free phone #. I would be calling him EVERYDAY until I got my product as promised. If not thru him then go above him in the company.
    Last edited by Ken Fitzgerald; 06-24-2008 at 6:44 PM. Reason: removed implied profanity

  3. #3
    Join Date
    Dec 2005
    Location
    Pennsylvania
    Posts
    896
    Quote Originally Posted by Ryan Sparreboom View Post
    Thats a crock. He left you a toll free phone #. I would be calling him EVERYDAY until I got my product as promised. If not thru him then go above him in the company.
    Have you seen the website? I have a feeling there is no "above" this guy. Looks like you're getting screwed, Steve.
    Last edited by Ken Fitzgerald; 06-24-2008 at 6:45 PM.
    "If you lend someone $20 and never see that person again, it was probably a wise investment."

  4. #4
    Join Date
    Mar 2003
    Location
    Monroe, MI
    Posts
    11,896
    Did you pay by credit card? If so, contact them. It might be too late, but a chargeback would probably get his attention.


  5. #5
    Matt Meiser with the excellente solutione. Good call!

  6. #6
    Join Date
    Oct 2006
    Location
    Bloomington, IL
    Posts
    6,009
    Wait a couple more months and go back to the show with your receipt and retun the blades. Stick around his booth showing other potentail buyers the chain of emails as well. Would very much be worth the $7 entrance fee.

  7. #7
    Join Date
    Apr 2008
    Location
    Chandler, Arizona
    Posts
    203
    I would say if that is the worst service you have ever gotten you are doing pretty well.

    Craig

  8. #8
    Many times you can raise a chargeback as many as six months after expected delivery of an item (and the seller extended his deadline by sending E-Mail saying he'd look into it).

    Ultimately, it depends on the card issuer. But CC companies truly have unlimited power to screw with merchants. It is at their sole discretion and when you have a paper trail as you do, they will more often than not help.

    Call/E-Mail the seller. Tell them that you need a resolution in 24 hours or you will take the E-Mail you have to the CC issuer and raise a chargeback. If the seller doesn't respond, then follow-through with it.

  9. #9
    Steve, I suggest you alert Woodworkershaven to all the free publicity that their stellar customer service has got them at Sawmillcreek. I won't be buying anything there soon.
    Last edited by peter de tappan; 06-25-2008 at 11:21 AM.

  10. #10
    Join Date
    Aug 2007
    Location
    Ocala, FL
    Posts
    67
    Steve,

    I emailed the company this morning. I have pasted the contents of that email below. Will be interested to see what response, if any, I receive. Thanks for the heads-up about your experience.

    Contents of email:

    I have been reading about the fiasco you are putting a fellow member of the Saw Mill Creek woodworker’s forum through for the last nine months. Common sense says if you don’t have the product you promised, send the guy a decent item in its place or refund his purchase price. Either alternative represents a very inexpensive way to avoid the ill will you are creating for (so far) 500 fellow woodworkers who have viewed the SMC page containing the story. For what it’s worth, I won’t be patronizing your company as long as lack of concern for customers is so evident in the way you do business.

    Here is a link to the SMC web page: http://www.sawmillcreek.org/showthread.php?t=87060

    John

  11. #11
    Quote Originally Posted by Craig McCormick View Post
    I would say if that is the worst service you have ever gotten you are doing pretty well.

    Craig
    Yea, he's doing great; we should all do so well. Gimme a break.
    Last edited by Vince Shriver; 06-25-2008 at 8:42 AM.

  12. #12
    Join Date
    Apr 2008
    Location
    Chandler, Arizona
    Posts
    203
    Vince,

    You are right.... Maybe I should have taken a nap before responding.

    On the other hand I have witnessed much worst customer service a few times in my life.

    Geeez, I still need a nap.

    Craig McCormick

  13. #13
    Join Date
    Aug 2007
    Location
    Ocala, FL
    Posts
    67
    I received a reply from Mike Hartman to my email referenced above. He was courteous and thanked me for the heads-up. He indicated he is going to sign on to SMC and will post a response. I appreciated his response.

    We all have times in our careers when we drop the ball, don't appreciate the impact on others of what seems to us to be a small issue, or otherwise cause problems for others and ourselves that we never anticipated nor intended. If this is such a case for Mike, then he is just the newest member of a club to which I have been a member for a long time.

    Steve, I hope this issue gets resolved soon.

    John

  14. #14
    WOW.

    I posted this yesterday afternoon, just to vent, and first thing this morning I have an email in my inbox from Woodworkershaven asking me to call and rectify the situation. I truly didn't expect it to escalate as it has.

    True, it's not the worst service I've ever had, and it's not about a $12 set of Cool Blocks either. But after almost 9 months of nothing, it looks like I've found a way to finally be heard.

    I will follow up with Mike, and I'll let you know what the outcome is. Thanks for the support, and reserve judgement for now. They may still come through with a suitable solution.

    I'll keep you posted!

  15. #15
    Join Date
    Mar 2007
    Location
    Kitchener, ont
    Posts
    1

    Woodworkershaven

    Is the company located in Baden Ontario?

    If so, I pass by that area everyday heading to work. I should stop in and give my two cents worth.

    Jason

Similar Threads

  1. Delta Tools- The Worst!!!
    By Clint Hood in forum General Woodworking and Power Tools
    Replies: 80
    Last Post: 05-10-2008, 6:24 PM
  2. Bosch Customer Service Excellence
    By Vernon Taylor in forum General Woodworking and Power Tools
    Replies: 0
    Last Post: 09-26-2007, 9:39 AM
  3. Milwaukee 5625 Spindle Issue & Customer Service
    By M. A. Espinoza in forum General Woodworking and Power Tools
    Replies: 6
    Last Post: 03-10-2006, 8:48 AM
  4. Electrical Geniuses
    By Byron Trantham in forum General Woodworking and Power Tools
    Replies: 20
    Last Post: 08-15-2005, 2:36 AM
  5. WTB -- 3 phase motor
    By Ralph Steffey in forum General Woodworking and Power Tools
    Replies: 14
    Last Post: 05-08-2005, 6:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •