Charleston Double Chest Take 2

[Calvin Hobbs]

Calvin,

Very nice work! I am familiar with the piece you did (from that book). Just curious how you do the fret or scroll work under the top (Thomas Elfe's 'signature'). Is that carved out?

Andrew,

Thanks for your comment. The fret work: Since I was making potentially enough fretwork for 4 chests I bandsawed strips of mahogany to a heavy 1/6th, scraped them, then ganged them together and cut them out with a scrollsaw. Then each individual piercing was cleaned up with chisels, and finally the fretwork was applied to the case with hide glue. Are you thinking of building it? You should....CH

[Andrew Long]

Are you thinking of building it? You should....CH

My wife and I visited Charleston last fall, and toured most of the old homes and nosed around the local antique shops. Got lots of pictures and ideas. I have the book mentioned, and have been trying to get the three book set on Charleston furniture (very pricey, but obtainable), mostly for ideas.

The Thomas Elfe double chest is certainly one I admire, and is on my future list of pieces I would like to tackle, but need do a couple other pieces for our home first. I have some very nice Cherry off our property set aside for a grandfather clock and a huntboard table to use in our foyer. I had planned on the chests or highboy project after that. These projects will keep me occupied for a while

You & your father are very talented craftsman, keep up the great work. Cherish those pieces and keep them in your family; they will make wonderful heirlooms.

[Cody Colston]

Outstanding work as usual, Calvin. I always look forward to seeing your family's yearly project pictures. You guys are a talented bunch.

[Tom Sontag]

... Are you thinking of building it? You should....CH

I am not sure you can say this Calvin. Yes it is achievable. Yes it would be a magnificent accomplishment (as yours is). But I found myself nodding my head to each hardship you mentioned; a big piece like this is like a marathon and it is easy to get discouraged. Not everyone finishes the marathon.

I find my temperament much more suited to smaller projects where I seem to do just fine. I am quite glad to tip my hat to those who can tackle and finish a large complex project, no matter how simple the steps may be. But I know first hand that, like simply jogging 26.2 miles, it isn't for everyone.

I applaud your success.

[Jim Becker]

Outstanding, Calvin!

[Bill Wyko]

OMG thats absolutely georgous. Just fantastic. A+++++++++

[C Scott McDonald]

Really nice Calvin,

I have a couple of questions. How is the top hest connected to the bottom chest? Also how did you do the reverse flutes or whatever they call them?

Thanks,
Scott

[Calvin Hobbs]

I am not sure you can say this Calvin. Yes it is achievable. Yes it would be a magnificent accomplishment (as yours is). But I found myself nodding my head to each hardship you mentioned; a big piece like this is like a marathon and it is easy to get discouraged. Not everyone finishes the marathon.

I find my temperament much more suited to smaller projects where I seem to do just fine. I am quite glad to tip my hat to those who can tackle and finish a large complex project, no matter how simple the steps may be. But I know first hand that, like simply jogging 26.2 miles, it isn't for everyone.

I applaud your success.

Certainly I understand your point Tom, and sticking to it seemed tough especially working through all those drawers. But my main point is to encourage others that there is nothing that "complicated" about a major piece if you break it down. Although I probably couldn't run a marathon tomorrow I think I could run a half mile a day for 10 weeks and make it to the end.

Thanks for your comment on the chest. Didn't I see somewhere that you are building the Townsend chest from Jeffrey Greene's book? If so, that is a great piece and I have the wood to make one myself (no, not from Lumber Logs unfortunately). How's the progress? Thanks again, Cal

[Calvin Hobbs]

Really nice Calvin,

I have a couple of questions. How is the top hest connected to the bottom chest? Also how did you do the reverse flutes or whatever they call them?

Thanks,
Scott

Scott,

Thanks for the comments on the chest. The top case simple sits on the lower case, gravity does the work. The stop-fluting was cut with a scratch stock that I filed to shape on a triangular jig/fixture to ride the fence on (my brother Matt made the jig). The tops and bottoms of the reeds were cut with a carving gouge. Thanks again, Cal

[mreza Salav]

very nicely done!! looks just great.

[Tom Sontag]

Didn't I see somewhere that you are building the Townsend chest from Jeffrey Greene's book? ... How's the progress?

Yes, in curly maple. I love the proportions of that piece.

Um, it is just possible that even a five drawer chest presents me with the kind of marathon issues I mentioned. This is my first use of hand cut DTs as a prominent feature (they'd been hidden or insignificant to the overall piece before now), and the carcass ones came out fine. It is possible that maybe the second half blind attempt was disappointing enough to set aside the whole thing for a while. Let's equate it to you twisting your ankle on one of those half mile runs. My ankle is feeling a bit better; I should be on the road again soon.

[Ben Hobbs]

It looks great, and it is surprsing how much room is in it. It was certainly fun to do this partly together and am looking forward to our next project. I guess Ernie will let us know what the project will be anyday now. You guys make me so proud. Dad (Ben Hobbs)

[Roy Wall]

Calvin -

That is a Big Boy for sure and takes some serious talent to pull it off - awesome!!!

I had the pleasure of seeing just the unfinished carcasses back in Feb. and it was terrific then.....now simply spectacular. I think I'll come over in a few weeks and see it in person again

There is a huge amount of hand work in this piece and Calvin just works it to perfection.........

[Bruce Page]

Calvin, I am always caught speechless when I look at your work.