Bandsaw outfeed table

[Jamie Buxton]

This is a photo of a Fairbanks (Johnson Bar).

http://nitorig.net/osCommerce/images/JohnsonBar.JPG

The fact that you bored a hole in the ply block has me thinking that your bar has mating male pin on the toe of it to engage and swivel in the hole plus keep it hooked together for transport.

Yes. Here's a picture of my current one, propped against a wall. It is about three feet long. You can see the male pin; it is just the head of a socket-head cap screw. It does have two wheels, but you can barely see one of them. I use it on the bandsaw and the jointer/planer. Some day I'll get around to putting a pick point for it on the table saw.