Originally Posted by
David Bryan West
My mobility kit has the wheels in the back always down touching the floor. Is this correct or should they somehow retract so the steel frame touches the floor?
There should be locking handles that permit you to lower and raise the fixed wheels so your machine is flat on the floor. There should be a lever for each wheel separately. To make it mobile, lift that end with the Johnson bar, let the wheels drop and then tighten the, um...tighteners. Then move the Johnson bar to the other end to lift it and be the third wheel, as it were, that is steerable. I cannot imagine your FS41 is different than my FS350 in that respect.
--
The most expensive tool is the one you buy "cheaply" and often...