I've been lurking on here for a while now and thought it was time for me to actually post something and be an active participant in the community.
My wife and I are expanding our family a bit and unfortunately that means my garage workshop is getting the boot in favor of another bedroom and bathroom. The good news is I get to start from scratch and build a new workshop in the back yard.
I know each shop is personal and really based on what type of projects folks plan to work on, but I'd love to get some insight from other woodworkers based on their experiences. While I don't have many questions at this point, I certainly welcome any and all recommendations or advice any veterans might have.
Right now I'm getting quotes from builders and trying to provide them with some more detail about the workshop portion of the build. The two question I have are:
1. Sheetrock or Plywood interior walls?
2. Are two 110v and two 220v circuits sufficient if they are dedicated to the shop tools?
Tools:
Drill Press, table saw (220v), planer, jointer, band saw, dust collector, router table, etc.
Images:
Garage ISO - https://i.imgur.com/VOTb9M4.jpg
Garage Floor Plan - https://i.imgur.com/COdbtwS.jpg
Thanks in advance for any feedback.
Eliot