Hey Guys,
So I have started the coffee table project to match the end table I built a while back. I have got my 3 walnut boards glued up, the pictures are straight out of the clamps. I have a couple of bad looking knots in the middle board and was wondering what to do. I have seen David Marks inlay other knots on them, good looking ones, which is an option. Or I could just try to fill them and see how they come out (leaining towards this) Or last I was thinking of an inlay. Basically the one picture shows how I am thinking of doing it, just inlay a big rectangle piece of tiger stripe maple or something that would look really eye catching. Only problem is I will be covering up so much solid, and beautiful black walnut. Anyway was wondering what you guys thought would be the best avenue to take on this top going forward. Thanks for any help, and I attached a couple of pics of my latest to projects to see what you all thought. Thanks again.