My honeycomb on my cutting bed is getting pretty beat up. Not dirty but bent and split and all kinds of not fun stuff.
I have found a supplier of aluminum eggcrate core that is 1/2 x 1/2 x 1. So the cores are 1/2 an inch by 1/2 an inch and the material is 1 inch tall. The panels come 24" X 48" inches. All you need to do is trim the material to fit into the frame of your cutting bed.
I have to order five of them. The price is $62 each plus shipping.
I plan on buying regardless but I thought I would ask if anyone else is interested to share the cost.
alumeggcrate.jpg