ESS to Mach3 and a special BoB from CNCRP, I can not give you the details as I have very little info on the controller only it works fine.
Did you download Carbon Copy to your Mac (trial version) to do your new SSD? Remember in Apple its Erase not Format that caused me to think for a bit. I did it all on my USB to SSD cable so it was formatted and all was transferred before I took a screw out of the Mac. Then you do need those little nubs re-installed on your new drive from the old one, you will see what I mean.
Frankly I would use Corel Draw thats what most of the folks on here use.
Retired Guy- Central Iowa.HVAC/R , Cloudray Galvo Fiber , -Windows 10