Results 1 to 15 of 135

Thread: Chisel sharpening - difficulties

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 02-20-2019, 10:24 PM #1
    Bryce Walter
    Bryce Walter is offline [OP] Member
    Join Date
    Jun 2010
    Location
    Leawood, KS
    Posts
    42

    Chisel sharpening - difficulties

    I'm a novice and am looking for insight into what I'm doing wrong.

    I'm using the Veritas Mk II sharpening jig. After flattening the back, I'm setting a 25 degree bevel first on the 300 and then 1000 stone. When I go to do the micro-bevel it's clear that something is not straight based on the results. I've gone through the process several times with consistent results.

    I've double checked that the chisel is sits square to the fence (both before & after), and am tightening the clamp knobs evenly. I'm applying even pressure to both sides of the chisel.

    What am I doing wrong?


    IMG_20190220_211041.jpg
    Last edited by Bryce Walter; 02-20-2019 at 10:27 PM. Reason: fixed: a word
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules