I have acquired a Jet 12" band saw. It was bought by a colleague's husband a number of years back, who then became ill and eventually died. The plastic bands holding the box closed had never even been removed.

Not surprisingly, having sat that long, the tires are shot. I am trying to replace them, but I am having a problem with the lower wheel. When trying to remove it, I cannot break the screw free.

I know it is a reverse thread -- I have been trying to turn it the correct direction. There is a matching screw in the back, and I have been trying to hold the wheel steady with that and break it free in the front to no avail. I have had my wife hold it steady while I try to break it free. Nothing. I have stopped for the afternoon because I am afraid I am going to round over the bolt head.

Any suggestions?

Cheers,

Chris