Hi! just moved all my hand tools into my hubby's power shop due to re-assigning basement space. I just counted all my saws, and came up with ten panel saws, 6 back saws, a couple of gent's saws and a dozuki. Oh, forgot the big mitre box saw and the little flush cutter. Now I have no idea where they were lurking, but I just kept finding them everywhere. I would like to finally hang em up so I could look at em and they would be easier to grab and use. I saw an article in FWW Tools and Shops annual issue 2006-2007, on the wall behind Tom Lie-Nielsen on page 87 looks like something that would be cool for my back saws at least. Looks like an open rectangular box around 6'' wide by 3' tall, maybe a 1x5 or 6' boards dovetailed, with the saws placed in a looks like 45 deg angle kerf. Any other ideas? After I get the saws hung, then it's time to work on plane storage. Thanks!