Originally Posted by
James Jaragosky
This is made from 1in thick Padouk the size is 10.5x8.5
the deer seen is from James Booth at vetctorart3d it came with my aspire purchase.
Fairly cheap to make; the clock parts are $5 the wood was around $7 and 1.5 hours on the CNC.
I like the tung oil finish on the Padouk.
Jim J
Hey James,
Great work!!!! but at 1.5 hours each can you make a profit?
What are you using for settings?
Tooling? How many?
step over?
RPM?
Feedrate?
Have a Blessed day,
Michael Kowalczyk
Laser-Trotec Speedy II 60 watt with 9.4.2 job control and will soon upgrade to JC X
Corel Draw Suite X6, FlexiSign Pro 8.62, AI CS3 and Lasertype6
CNC Routers-Thermwood model C40 with 4th axis. Thermwood Model 42 with dual tables and dual spindles with ATC for high production runs,
ArtcamPro 2010_SP4, EnroutePro 5.1, BobCad v21 & v24, Aspire v8 and Rhino 5.
FOTC link
http://www.sawmillcreek.org/friends.php?cp=210&lp=0&t=0&q=