I have a 30amp breaker running my 220 outlet. I need a 35 amp or bigger. Not sure of they make a 35 in the brand thats in my box so maybe a 40 or 50. Will there be any issues i.e. wiring gauge by upping breaker amp? It will only be running one tool at a time. Currently I run a 3hp TS off of it or a 220 volt heater or a 5hp 20" planer. Nothing pops it.
The sander I want to hook up to it runs onload at 30 amps and the conveyor I think 2 amps.
Thanks