I have a Norton 220/1000, King 1000 with attached base and a king 8000 with attached base. Should I leave these in water all of the time? I am assuming the Norton is OK and the king 1000 (not sure if it will affect the connected base). I am not sure about the king 8000. I have read that 8000 stones should not soak and just be misted before use. So I am confused. I know in Cosman's video he pulls his 8000 out of water and looks like they live there. His does not have a base attached. I use the Norton 1000 side to flatten the other 2 stones which are my primary stones. I have not really used the 220 side of that stone but I do have some beat up chisels that may get some use on it... Thanks, John