So I've been reading up on torsion box tables and how good they are for doing projects with a dead flat top, so I made one this weekend. I copied the design and steps from David Marks and built one with 1/2" mdf top and bottom. Size is 42" x 72". It is now done, nice and flat ready to use, but..... It is fricken heavy, without even legs. It's got to be over a hundred lbs. I built it without legs on purpose as to store it against the wall of my garage as this is how I work. I move everything to the sides to park the 2 cars in when I'm not woodworking. When I do projects, I take the cars out and set up all my machines and put them back when I'm done for the weekend.
So I built this table with the intentions of leaving it on the side wall and setting it up maybe with folding legs or something when I want to use it, but it is so heavy that I can't carry it onto legs or horses by myself!
So does anyone out there have an idea how I can make something so I can move (roll) it on the side vertically against or on a wall when not in use and be able to set it up when I want to by myself?
Any ideas would be appreciated.
Thanks,
Rob