Is this Lathe worth the money ? Good and bad points on this lathe ???
Looks like it is on sale.
Is this Lathe worth the money ? Good and bad points on this lathe ???
Looks like it is on sale.
I know nothing about it (didn't know it existed) but after the customer service nightmares people had over Laguna's 18/47 lathe, I will never touch ANY of their products.
Nova DVR XP, so-so Sears bandsaw, no-name grinder, a load of Thompson tools, growing pile of "design opportunities"
Steve
Im curious what was the problem?
I got this lathe about a month ago and love it. Fit and finish is very good. I used it to make my 2012 ornaments.
Just cut off the parts that don't look like a bowl...
Laguna seems to be very hit or miss... some people get great machines, and others have nothing but problem after problem. Say what you will about <insert company name here>, anytime I see a lot of both good and bad reviews, I think quality assurance issues. They may have a good product, but if they can't kick out a consistent product, I try not to be the test rat.
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
I bought one. I was sold on the outboard turning ability up to 16". I'm not sure if the lathe is up to it but the bed ways are a little thicker than the comparable Jet and Rikon lathes that I saw. Anyway, it works great but I've only been turning for a couple of weeks so what do I know.
When I got the lathe there was no manual and the minimum speed was higher than they stated on the box. After one call to Laguna I got a PDF of the manual and instructions on how to adjust the electronic speed control.
I don't know much about Laguna but it appears that most of the customer service issues were from a few years ago. By contrast, I really liked the Delta Midi lathe but it was about twice as much and recently people have had issues getting service parts on even new tools like their 18" Drill Press.
Bottom Line, I would recommend the lathe but I am a beginner.
Gary
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
I guess I missed the debate. I just know that with the Delta reorganization that nothing is certain there and it's currently difficult to get parts. I read that WMH Tool group does not support service parts very well, but I don't know how true that is. So who does it leave? I know first hand that Rikon has good service. Seems like Grizzly does.
Well like I said Laguna took care of me. I got the PDF for the manual within minutes. It took Tech support about a day since they had to contact someone in Asia. Once they sent the response I even got a follow up phone call to be sure I understood what to do.
I'm not trying to debate but people (myself included) seem to be more vocal about dissatisfaction than satisfaction so here is one good one for Laguna. Let's hope they keep it up.
Last edited by Gary Muto; 01-07-2013 at 1:55 PM. Reason: typo
Gary
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5