LOML is out at her parents this weekend and I have been left to my own devices. II've been wanting to build a shaker lap desk for a while, and yesterday I ran across this old plan from the woodworkers journal.
Since I can't wrap up my other project until my hardware arrives I decided to challenge myself and see if I can complete the construction of this relatively simple project by the end of the weekend. Not only will I hopefully end up with a nice lap desk, but I'll get to use up a bunch of BORG pine cutoffs in the process.
Here's the progress so far after about 3 hours of work.
Carcass pieces roughly dimensioned.
IMG_20130615_102600_074.jpg
Dimensioning complete and ready for joinery
IMG_20130615_113027_224.jpg
Grooves cut and its time to start the dovetails.
IMG_20130615_120021_162.jpg IMG_20130615_121005_481.jpg
Sides are dovetailed to the back.
IMG_20130615_125321_983.jpg IMG_20130615_125345_925.jpg
Just finished lunch break, time to turn of the History channel special on the Dark Ages and get back to dovetailing the front.
More to come....