Quote Originally Posted by John A langley View Post
Two Tablesaws ,one slider ,20 inch thickness planer, three shapers, panel router, line boring, Pocket hole drill and table, two miter saws, door clamping table, 16 inch bandsaw, drum sander and edge sander, router table, 8 inch joiner, 4 inch joiner, CAT technology spraygun ,36 inch wide belt sander shop 3700sq ,ft almost forgot five horse air compressor and air dryer and 25 horse phase converter
I count 19 stationary tools. Is that right? Is the slider one of the two table saws or a separate tool? Is there a finishing room or lumber kiln? I am not counting that space in the space/tool ratio. Is it a commercial shop?

Subject to revision with your help, but I get Z=3700/19=194.7 sq. ft/tool.

Thanks.

TW