Hello, I'm fairly new around here, but have been lurking for a while, and replied to a couple other threads.
Here's a table I recently completed that I thought I would share. Most of the wood comes off some land I own. The legs I hewed with axes, and the feet come from some old maples that we tapped as kids. The outer boards were milled from a downed tree using a chainsaw mill and air dried for 3 years... Almost all the rest was done with hand tools. (I did cheat and took the top to a local shop for final flattening with a large sander.)
The only "store bought" wood is the maple inner boards and breadboard ends, and the walnut butterflies. (Which are full thickness, not just inlays...)
Now the wife wants chairs to go with it... The ones we have just don't quite go with it...
2014-03-24_00-00-00_9.jpg
2014-03-24_00-00-00_8.jpg
2014-03-24_00-00-00.jpg
2014-03-24_00-00-00_5.jpg