Hi there, I have a dilemma at the top of the stairs.
IMG_0309.JPG
Is there a clean way to transition down 3/4". I was going to finish the end as a return. I read a thread from a few years ago that had a pretty good idea. Here is the original picture. Kind of similar to my issue but I have no idea if it would work for my profile and how to do it based on the picture.
flush config.jpg
I do realize that I could rip 3/4" off the bottom but I would have to do that for an entire 400 square foot room. Does anyone have any other ideas?
Thanks, Chris